##
## Copyright (C) 1990-2007, Condor Team, Computer Sciences Department,
## University of Wisconsin-Madison, WI.
## 
## Licensed under the Apache License, Version 2.0 (the "License"); you
## may not use this file except in compliance with the License.  You may
## obtain a copy of the License at
## 
##    http://www.apache.org/licenses/LICENSE-2.0
## 
## Unless required by applicable law or agreed to in writing, software
## distributed under the License is distributed on an "AS IS" BASIS,
## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
## See the License for the specific language governing permissions and
## limitations under the License.
##
##**************************************************************


# Condor.pm - a Perl API to Condor
#
# 19??-???-?? originally written by stanis (?)
# 2000-Jun-02 Total overhaul by pfc@cs.wisc.edu and wright@cs.wisc.edu
# 2004-July-07 Add detecting $ENV(foo) in submit file parseing and fetch
#	from the environment before saving attribute pair.

# NOTE: currently works with only one cluster at a time (i.e., you can
# submit & monitor many clusters in series, but not in parallel).
# This won't be hard to fix, but it's best done using Perl
# quasi-objects and I'm not familiar enough with them to do it quickly
# and have a roaring deadline to meet...sorry.  --pfc

package Condor;

use strict;
use warnings;

use Carp;
use File::Spec;
use POSIX qw/sys_wait_h strftime/;

use CondorUtils;

my $CONDOR_SUBMIT = 'condor_submit';
my $CONDOR_SUBMIT_DAG = 'condor_submit_dag';
my $CONDOR_VACATE = 'condor_vacate';
my $CONDOR_VACATE_JOB = 'condor_vacate_job';
my $CONDOR_RESCHD = 'condor_reschedule';
my $CONDOR_RM = 'condor_rm';

my %AllowedEvents = ();
my $DEBUGLEVEL = 1; # turn on lowest level output
my $cluster = 0;
my $num_active_jobs = 0;
my $saw_submit = 0;
my %submit_info;
my @userlogs = ();
my @submitdrydata = ();
my $dryrun_jobcount = 0;
my %info; # assigned value of %submit_info frequently

my $submit_time = 0;
my $timer_time = 0;
my $timer_SJtime = 0;
my $timer_CLtime = 0;
my $CLTimedCallbackWait = 0;
my $SJTimedCallbackWait = 0;
my $TimedCallbackWait = 0;
my $UsageCallback;
my $SubmitCallback;
my $ExecuteCallback;
#my $EvictedCallback;
my $EvictedWithCheckpointCallback;
my $EvictedWithRequeueCallback;
my $EvictedWithoutCheckpointCallback;
my $ExitedCallback;
my $ExitedSuccessCallback;
my $ExitedFailureCallback;
my $ExitedAbnormalCallback;
my $AbortCallback;
my $SuspendedCallback;
my $UnsuspendedCallback;
my $ShadowCallback;
my $ImageUpdatedCallback;
my $HoldCallback;
my $ReleaseCallback;
my $DisconnectedCallback;
my $ReconnectedCallback;
my $ReconnectFailedCallback;
my $JobErrCallback;
my $CLTimedCallback;
my $SJTimedCallback;
my $TimedCallback;
my $WantErrorCallback;
my $ULogCallback;


sub Reset
{
	@submitdrydata = ();
	@userlogs = ();
    $cluster = 0;
    $num_active_jobs = 0;
	$dryrun_jobcount = 0;
    $saw_submit = 0;
    %submit_info = ();

	$submit_time = 0;
	$timer_time = 0;
	$timer_SJtime = 0;
	$timer_CLtime = 0;
	$CLTimedCallbackWait = 0;
	$SJTimedCallbackWait = 0;
	$TimedCallbackWait = 0;

    undef $SubmitCallback;
    undef $ExecuteCallback;
    #undef $EvictedCallback;
    undef $EvictedWithCheckpointCallback;
    undef $EvictedWithRequeueCallback;
    undef $EvictedWithoutCheckpointCallback;
    undef $ExitedCallback;
    undef $ExitedSuccessCallback;
    undef $ExitedFailureCallback;
    undef $ExitedAbnormalCallback;
    undef $AbortCallback;
    undef $ShadowCallback;
	undef $ImageUpdatedCallback;
    undef $HoldCallback;
    undef $ReleaseCallback;
    undef $DisconnectedCallback;
    undef $ReconnectedCallback;
    undef $ReconnectFailedCallback;
    undef $JobErrCallback;
    undef $CLTimedCallback;
    undef $SJTimedCallback;
    undef $TimedCallback;
    undef $WantErrorCallback;
    undef $ULogCallback;
}

sub EventReset {
	ClearAllowedEvents();
    undef $SubmitCallback;
    undef $ExecuteCallback;
    #undef $EvictedCallback;
    undef $EvictedWithCheckpointCallback;
    undef $EvictedWithRequeueCallback;
    undef $EvictedWithoutCheckpointCallback;
    undef $ExitedCallback;
    undef $ExitedSuccessCallback;
    undef $ExitedFailureCallback;
    undef $ExitedAbnormalCallback;
    undef $AbortCallback;
    undef $ShadowCallback;
	undef $ImageUpdatedCallback;
    undef $HoldCallback;
    undef $ReleaseCallback;
    undef $DisconnectedCallback;
    undef $ReconnectedCallback;
    undef $ReconnectFailedCallback;
    undef $JobErrCallback;
    undef $WantErrorCallback;
    undef $ULogCallback;

	# components of the single timed timer
    undef $CLTimedCallback;
    $timer_CLtime = 0;
    $CLTimedCallbackWait = 0;

    undef $SJTimedCallback;
    $timer_SJtime = 0;
    $SJTimedCallbackWait = 0;

    undef $TimedCallback;
    $timer_time = 0;
    $TimedCallbackWait = 0;
}

sub NonEventReset {
	@submitdrydata = ();
    @userlogs = ();
    $cluster = 0;
    $num_active_jobs = 0;
    $dryrun_jobcount = 0;
    $saw_submit = 0;
    %submit_info = ();

    $submit_time = 0;
} 

sub SetHandle
{
	my $handle = shift;
	$submit_info{'handle'} = $handle;
	#print "Setting handle to $handle\n";;
}


# submits job/s to condor, recording all variables from the submit
# file in global %submit_info
#
# - takes the name of a submit file as an argument
# - returns 0 upon failure, or cluster id upon success
sub Submit
{
    my $cmd_file = shift || croak "missing submit file argument";

    # reset global state
    Reset();

    # submit the file
    runCommand( "$CONDOR_SUBMIT $cmd_file > $cmd_file.out 2>&1" )
	|| return 0;

	$submit_time = time; # time reference for time callback

    # snarf the cluster id from condor_submit's output
    unless( open( SUBMIT, "<$cmd_file.out" ) )
    {
		warn "error opening \"$cmd_file.out\": $!\n";
		return 0;
    }
    while( <SUBMIT> )
    {
		if( /\d+ job\(s\) submitted to cluster (\d+)./ )
		{
	    	$cluster = $1;
	    	last;
		}
    }
    close SUBMIT;

    # if for some reason we didn't find the cluster id 
    unless( $cluster )
    {
		warn "error: couldn't find cluster id in condor_submit output\n";
		return 0;
    }
    
    # snarf info from the submit file and save for future reference
    unless( ParseSubmitFile( $cmd_file ) )
    {
		print "error: couldn't correctly parse submit file $cmd_file\n";
		return 0;
    }

    return $cluster;
}

# submits job/s to condor dagman
#
# - takes the name of a dag file as an argument
# - returns 0 upon failure, or cluster id upon success
sub SubmitDagman
{
    my $cmd_file = shift || croak "missing Dag file argument";
	my $cmd_args = shift || croak "missing Dagman Args";

    # reset global state
    Reset();

    # submit the file
    runCommand( "$CONDOR_SUBMIT_DAG $cmd_args -f -notification never $cmd_file > $cmd_file.out 2>&1" )
	|| return 0;

	$submit_time = time; # time reference for time callback

    # snarf the cluster id from condor_submit's output
    unless( open( SUBMIT, "<$cmd_file.out" ) )
    {
		warn "error opening \"$cmd_file.out\": $!\n";
		return 0;
    }
    while( <SUBMIT> )
    {
		if( /\d+ job\(s\) submitted to cluster (\d+)./ )
		{
	    	$cluster = $1;
			debug("  Cluster is $cluster\n",5);
	    	last;
		}
    }
    close SUBMIT;

    # if for some reason we didn't find the cluster id 
    unless( $cluster )
    {
		warn "error: couldn't find cluster id in condor_submit output\n";
		return 0;
    }
    
    # snarf info from the submit file and save for future reference
	my $dagsubmitfile = $cmd_file  . ".condor.sub";
    unless( ParseSubmitFile( $dagsubmitfile ) )
    {
		print "error: couldn't correctly parse submit file $dagsubmitfile\n";
		return 0;
    }

    return $cluster;
}

# submits job/s to condor, recording all variables from the submit
# file in global %submit_info
#
# - takes the name of a submit file as an argument
# - returns 0 upon failure, or cluster id upon success
sub TestSubmit
{
    my $cmd_file = shift || croak "missing submit file argument";
	my $submitOutput = "";

    my $debug_arg = "";

    #if( $DEBUG ) {
	$debug_arg = "-debug";
    #}

    # reset global state
    # Reset();
	# Reset done in CondorTest.pm prior to submit

    # submit the file
    runCommand( "$CONDOR_SUBMIT $debug_arg $cmd_file > $cmd_file.out 2>&1" )
	|| return 0;

	$submit_time = time; # time reference for time callback

    # snarf the cluster id from condor_submit's output
    unless( open( SUBMIT, "<$cmd_file.out" ) )
    {
		warn "error opening \"$cmd_file.out\": $!\n";
		return 0;
    }
    while( <SUBMIT> )
    {
		$submitOutput .= $_;
		if( /\d+ job\(s\) submitted to cluster (\d+)./ )
		{
	    	$cluster = $1;
	    	last;
		}
    }
    close SUBMIT;

    # if for some reason we didn't find the cluster id 
    unless( $cluster )
    {
		warn "error: couldn't find cluster id in condor_submit output:\n $submitOutput";
		return 0;
    }
    
    # snarf info from the submit file and save for future reference
    unless( ParseSubmitFile( $cmd_file ) )
    {
		print "error: couldn't correctly parse submit file $cmd_file\n";
		return 0;
    }

    return $cluster;
}

# submits job/s to condor dagman
#
# - takes the name of a dag file as an argument
# - returns 0 upon failure, or cluster id upon success
sub TestSubmitDagman
{
    my $cmd_file = shift || croak "missing Dag file argument";
	my $cmd_args = shift || croak "missing Dagman Args";
	my $argisrefarray = ref $cmd_file;
	my $outfile = $cmd_file;
	my $cmdfiles = "";

	print "ref said type is <<$argisrefarray>>\n";
    # reset global state
    # Reset();
	# Reset done in CondorTest.pm prior to submit

    # submit the file
	if($argisrefarray eq "ARRAY") {
		$outfile = ${$cmd_file}[0];
		foreach my $ddd (@{$cmd_file}){
			$cmdfiles = $cmdfiles . " $ddd";
		}
		print "Multiple Dag Files: <$cmdfiles>\n";
    	runCommand( "$CONDOR_SUBMIT_DAG $cmd_args -f -notification never $cmdfiles > $outfile.out 2>&1" )
			|| return 0;
	} else {
    	runCommand( "$CONDOR_SUBMIT_DAG $cmd_args -f -notification never $cmd_file > $outfile.out 2>&1" )
			|| return 0;
	}

	$submit_time = time; # time reference for time callback

    # snarf the cluster id from condor_submit's output
    unless( open( SUBMIT, "<$outfile.out" ) )
    {
	warn "error opening \"$outfile.out\": $!\n";
	return 0;
    }
    while( <SUBMIT> )
    {
	if( /\d+ job\(s\) submitted to cluster (\d+)./ )
	{
	    $cluster = $1;
		debug("  Cluster is $cluster\n",5);
	    last;
	}
    }
    close SUBMIT;

    # if for some reason we didn't find the cluster id 
    unless( $cluster )
    {
		warn "error: couldn't find cluster id in condor_submit output\n";
		return 0;
    }
    
    # snarf info from the submit file and save for future reference
	my $dagsubmitfile = $outfile  . ".condor.sub";
    unless( ParseSubmitFile( $dagsubmitfile ) )
    {
		print "error: couldn't correctly parse submit file $dagsubmitfile\n";
		return 0;
    }

    return $cluster;
}

sub Vacate
{
    my $machine = shift || croak "missing machine argument";
    return runCommand( "$CONDOR_VACATE $machine > condor_vacate.out 2>&1" );
}

sub Reschedule
{
    my $machine = shift;
	
	if(defined $machine) {
    	return runCommand( "$CONDOR_RESCHD $machine > condor_resched.out 2>&1" );
	} else {
    	return runCommand( "$CONDOR_RESCHD > condor_resched.out 2>&1" );
	}
}

# runs a command string, returning 0 if anything went wrong or 1 upon success
sub runCommand
{
    my $command_string = shift;
    my ($command) = split /\s+/, $command_string;
    
    debug( "  Running command: $command_string\n" ,5);
    my $retval = system( $command_string );

    # did command die abormally?
	
    if( ! safe_WIFEXITED( $retval ) )
    {
        print "error: $command died abnormally\n";
		#call error callback
		$info{'ErrorMessage'} = "error: $command died abnormally";
		if (defined $WantErrorCallback )
		{
			debug("  Calling error callback! at @ $WantErrorCallback\n",6);
			&$WantErrorCallback( %info );
			return 1;
		}
		DumpFailedCommand($command_string);
        return 0;
    }

    # did command exit w/an error?
    if( safe_WEXITSTATUS( $retval ) != 0 )
    {
		my $exitval = safe_WEXITSTATUS( $retval );
        print "error: $command failed (returned $exitval)\n";
		#call error callback
		$info{'ErrorMessage'} = "error: $command failed (returned $exitval)";
		if (defined $WantErrorCallback )
		{
			debug("  Calling error callback! at @ $WantErrorCallback\n",6);
			&$WantErrorCallback( %info );
			return 1;
		}
		DumpFailedCommand($command_string);
        return 0;
    }

    return 1;
}

sub DumpFailedCommand
{
    my $cmd = shift @_;
    my $output = "";
    print "ERROR: $cmd failed.\n";
	# was command one that saved error and output to a file?
    if($cmd=~ /(.*)\s+>\s+(.*)\s+2>&1/) {
        $output = $2;
		if(!open( MACH, "<$output" )) {
			warn "$cmd did not have an output file to add\n";
		} else {
    		print "ERROR: Output follows:\n";
    		while(<MACH>) {
        		print "ERROR: $_";
    		}
    		close(MACH);
    		print "ERROR: Output done:\n";
		}
    }
}

sub RegisterUsage
{
    my $sub = shift || croak "missing argument";
    $UsageCallback = $sub;
}

sub RegisterSubmit
{
    my $sub = shift || croak "missing argument";
    $SubmitCallback = $sub;
}

sub RegisterExecute
{
    my $sub = shift || croak "missing argument";
    $ExecuteCallback = $sub;
}

# only spcific evictions are enabled
#sub RegisterEvicted
#{
    #my $sub = shift || croak "missing argument";
    #$EvictedCallback = $sub;
#}

sub RegisterEvictedWithCheckpoint
{
    my $sub = shift || croak "missing argument";
    $EvictedWithCheckpointCallback = $sub;
}

sub RegisterEvictedWithRequeue
{
    my $sub = shift || croak "missing argument";
    $EvictedWithRequeueCallback = $sub;
}

sub RegisterEvictedWithoutCheckpoint
{
    my $sub = shift || croak "missing argument";
    $EvictedWithoutCheckpointCallback = $sub;
}

sub RegisterExit
{
    my $sub = shift || croak "missing argument";
    $ExitedCallback = $sub;
}

sub RegisterExitSuccess
{
    my $sub = shift || croak "missing argument";
    $ExitedSuccessCallback = $sub;
}    

sub RegisterExitFailure
{
    my $sub = shift || croak "missing argument";
    $ExitedFailureCallback = $sub;
}    

sub RegisterExitAbnormal
{
    my $sub = shift || croak "missing argument";
    $ExitedAbnormalCallback = $sub;
}
sub RegisterAbort
{
    my $sub = shift || croak "missing argument";
    $AbortCallback = $sub;
}
sub RegisterImageUpdated
{
    my $sub = shift || croak "missing argument";
    $ImageUpdatedCallback = $sub;
}
sub RegisterShadow
{
    my $sub = shift || croak "missing argument";
    $ShadowCallback = $sub;
}
sub RegisterHold
{
    my $sub = shift || croak "missing argument";
    $HoldCallback = $sub;
}
sub RegisterRelease
{
    my $sub = shift || croak "missing argument";
    $ReleaseCallback = $sub;
}
sub RegisterDisconnected
{
    my $sub = shift || croak "missing argument";
    $DisconnectedCallback = $sub;
	debug("  Registering Disconnnected callback\n",2);
}
sub RegisterReconnected
{
    my $sub = shift || croak "missing argument";
    $ReconnectedCallback = $sub;
	debug("  Registering Reconnnected callback\n",2);
}
sub RegisterReconnectFailed
{
    my $sub = shift || croak "missing argument";
    $ReconnectFailedCallback = $sub;
}
sub RegisterJobErr
{
    my $sub = shift || croak "missing argument";
    $JobErrCallback = $sub;
}
sub RegisterULog
{
    my $sub = shift || croak "missing argument";
    $ULogCallback = $sub;
}
sub RegisterWantError
{
    my $sub = shift || croak "missing argument";
    $WantErrorCallback = $sub;
}
sub RegisterSuspended
{
    my $sub = shift || croak "missing argument";
    $SuspendedCallback = $sub;

	debug("  Registering Suspended callback\n",2);
}
sub RegisterUnsuspended
{
    my $sub = shift || croak "missing argument";
    $UnsuspendedCallback = $sub;

	debug("  Registering Unsuspended callback\n",2);
}

sub RegisterCLTimed
{
    my $sub = shift || croak "missing callback argument";
    my $delta = shift || croak "missing time argument";

	if(((defined $timer_CLtime) && ($timer_CLtime != 0)) && (defined $CLTimedCallback)) {
		print "CL Timer already in use!!!!!!!\n";
		CondorTest::IdentifyTimer($CLTimedCallback);
		die "This test has conflicting timers\n";
	}
	$timer_CLtime = time;
    $CLTimedCallback = $sub;
	$CLTimedCallbackWait = $delta;
}

sub RemoveCLTimed
{
    $timer_CLtime = undef;
    $CLTimedCallback = undef;
    $CLTimedCallbackWait = undef;
}

sub RegisterSJTimed
{
    my $sub = shift || croak "missing callback argument";
    my $delta = shift || croak "missing time argument";

	if(((defined $timer_SJtime) && ($timer_SJtime != 0)) && (defined $SJTimedCallback)) {
		print "SJ Timer already in use!!!!!!!\n";
		CondorTest::IdentifyTimer($SJTimedCallback);
		die "This test has conflicting timers\n";
	}
	$timer_SJtime = time;
    $SJTimedCallback = $sub;
	$SJTimedCallbackWait = $delta;
}

sub RemoveSJTimed
{
    $timer_SJtime = undef;
    $SJTimedCallback = undef;
    $SJTimedCallbackWait = undef;
}

sub RegisterTimed
{
    my $sub = shift || croak "missing callback argument";
    my $delta = shift || croak "missing time argument";

	if(((defined $timer_time) && ($timer_time != 0)) && (defined $TimedCallback)) {
		print "Timer already in use!!!!!!!\n";
		CondorTest::IdentifyTimer($TimedCallback);
		die "This test has conflicting timers\n";
	}
	$timer_time = time;
    $TimedCallback = $sub;
	$TimedCallbackWait = $delta;
}

sub RemoveTimed
{
    $timer_time = undef;
    $TimedCallback = undef;
    $TimedCallbackWait = undef;
}

sub Wait
{
    while( wait() != -1 ) { };
    return $?;
}

sub IsAbsolutePath {
    my ($path) = @_;
    return File::Spec->file_name_is_absolute($path);
}

sub monitor_debug {
	my ($msg, $level) = @_;
	my $indent = " " x ($level+1);
	debug ( $indent . "(Mon$$) $msg", $level);
}

# spawn process to monitor the submit log file and execute callbacks
# upon seeing registered events
# July 26, 2013
#
# Major architecture change as we used more callbacks for testing
# I stumbled on value in the test which were to be changed by the callbacks were not being
# changed. What was happening in DoTest was that we would fork and the child was
# running monitor and that callbacks were changing the variables in the child's copy.
# The process that is the test calling DoTest was simply waiting for the child to die
# so it could clean up. Now The test switches to be doing the monitoring and the 
# callbacks switch it back up to the test code for a bit. The monitor and the 
# test had always been lock-steped anyways so getting rid of the child
# has had little change except that call backs can be fully functional now.
#
# April Fools Day, we have traversed this slippery slope with the cmd_q_shows- tests
# we we want to set the stage and then return to see the impact on the queue. The new 
# submit file parsing gives us many ways to condor_submit foreach *. One of the first issues
# is that one or more logfiles will exist and not for sure where the log = says it is/ they are.
#
# When we parse the submit file we will also run dry-run analysis to extract true locations
# and numbers of user logs.
sub Monitor
{
    my $timeout = shift;
    my $linenum = 0;
    my $line;
    #my %info;
	my $timestamp = 0;

	debug( "Monitor (Mon$$) Beginning eventlog monitor\n" , 1);

# commented out until we can do it right -- pfc

#    # fork new process
#    $pid = fork();
#    die "error: fork() failed: $!\n" unless defined $pid;
#    # if we're the parent, return
#    return if $pid;
 


# 4/3/2015 bt
# as we start to test condor_submit foreach, our clusters are more disperse
# and likely that we could have a bogus file in $submit_info{'log'} because we have a variant
# InitiaDir from the queue line parsing like "queue InitialDir matching (*/)"
#
# if $submit_info{'log'} is valid, go with it for now. At this point we have filled @userlogs
# and we might want to iterate though that array and Monitor each one sequentialy.

	my $reallog = "";
	my $userlogcnt = @userlogs;
	my $thislog = 0;
	my $skipcheck = "true";


		#print "thislog:$thislog userlogcnt:$userlogcnt in while loop\n";
	    # open submit log
		if( exists $submit_info{'initialdir'} )
		{
			my $logrequest = $submit_info{'log'};
			if( IsAbsolutePath($logrequest) )
			{
				#print "SLASH RELATIVE Log file, LEAVE IT ALONE!\n";
				unless( open( SUBMIT_LOG, "<$submit_info{'log'}" ) )
				{
					warn "error opening $submit_info{'log'}: $!\n";
					print "Trying to open $submit_info{'log'}!!!!! Initialdir ignored!\n";
					return 0;
				}
			}
			else
			{
				$reallog = $submit_info{'initialdir'} . "/" .  $submit_info{'log'};
				unless( open( SUBMIT_LOG, "<$reallog" ) )
				{
					warn "error opening $reallog: $!\n";
					print "Trying to open $reallog!!!!! Initialdir ...NOT... ignored!\n";
					return 0;
				}
			}
		} else { # Assume a good log file
			unless( open( SUBMIT_LOG, "<$submit_info{'log'}" ) )
			{
				warn "error opening $submit_info{'log'}: $!\n";
				print "Trying to open $submit_info{'log'}!!!!! Initialdir ignored!\n";
				return 0;
			}
		}

	  LINE:
	    while( 1 )
	    {

		if( $saw_submit && $num_active_jobs == 0 )
		{
			monitor_debug( "leaving eventlog monitor because num_active_jobs=$num_active_jobs\n" , 1);
			return 1;
		}

		# once every event or second see if we should do a timedCallback
		%info = %submit_info; # get initial value of submit stuff in case no events come and we time out

		if(defined $CLTimedCallback)
		{
			CheckCLTimedCallback();
		}

		if(defined $SJTimedCallback)
		{
			CheckSJTimedCallback();
		}

		if(defined $TimedCallback)
		{
			CheckTimedCallback();
		}

		# read line from log (if we're at EOF, wait and re-try)
		$line = <SUBMIT_LOG>;
		while( ! defined $line )
		{
			sleep 2;

			if(defined $CLTimedCallback)
			{
				CheckCLTimedCallback();
			}

			if(defined $SJTimedCallback)
			{
				CheckSJTimedCallback();
			}

			if(defined $TimedCallback)
			{
				CheckTimedCallback();
			}
			$line = <SUBMIT_LOG>;
		}
		CondorUtils::fullchomp($line);
		$linenum++;

	      PARSE:

		# reset %info hash to clear details added for last event
		%info = %submit_info;

		# if this line is for another cluster, ignore
		if ( $line =~ /^\d+\s+\(0*(\d+)\./ && $1 != $cluster )
		{
		    #monitor_debug( "log line for cluster $1, not $cluster -- ignoring...\n" ,1);
		    next LINE;
		}
		
		# 004: job evicted
		if( $line =~ /^004\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    my $job_id = "$1.$2";

		    monitor_debug( "Saw job $job_id evicted\n" ,2);

		    # read next line to see if job was checkpointed (but first
		    # sleep for 5 seconds to give it a chance to appear)
		    # [this should really loop like above, not sleep like this...]
		    # sleep 5;
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

		    if( $line =~ /^\s+\(0\) Job was not checkpointed\./ )
		    {
			monitor_debug( "$job_id was evicted without ckpt\n" ,2);
			# execute callback if one is registered
			&$EvictedWithoutCheckpointCallback( %info )
			    if defined $EvictedWithoutCheckpointCallback;

		    }
		    elsif( $line =~ /^\s+\(1\) Job was checkpointed\./ )
		    {
			monitor_debug( "$job_id was evicted with ckpt\n" ,2);
			# execute callback if one is registered
			&$EvictedWithCheckpointCallback( %info )
			    if defined $EvictedWithCheckpointCallback;
		    }
		    elsif( $line =~ /^\s+\(0\) Job terminated and was requeued.*$/ )
		    {
			monitor_debug( "$job_id was evicted and requeued\n" ,2);
			# execute callback if one is registered
			&$EvictedWithRequeueCallback( %info )
			    if defined $EvictedWithRequeueCallback;
		    }
		    else
		    {
			monitor_debug( "parse error on line $linenum of $info{'log'}\n\tno checkpoint message found after eviction. continuing...\n", 1);
			# re-parse line so we don't miss whatever it said
			goto PARSE;
		    }
			# let all the special callbacks got first
		    # execute callback if one is registered
			# Are there any other types of evictions?
		    #&$EvictedCallback( %info )
			#if defined $EvictedCallback;

		    next LINE;
		}

		# 005: job terminated
		if( $line =~ /^005\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    my $job_id = "$1.$2";

		    monitor_debug( "Saw job $job_id terminated\n" ,2);

		    # decrement # of queued jobs so we will know when to exit monitor
		    $num_active_jobs--;

		    # execute callback if one is registered
		    &$ExitedCallback( %info )
				if defined $ExitedCallback;

		    # read next line to see how job terminated
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

		    # terminated successfully
		    if( $line =~ /^\s+\(1\) Normal termination \(return value 0\)/ )
			    {
				# execute callback if one is registered
				&$ExitedSuccessCallback( %info )
			    	if defined $ExitedSuccessCallback;
		    	}
		    # terminated w/error
		    elsif( $line =~ 
			   /^\s+\(1\) Normal termination \(return value (\d+)\)/ )
			    {
				$info{'retval'} = $1;
				# execute callback if one is registered
				&$ExitedFailureCallback( %info )
				    if defined $ExitedFailureCallback;
			    }
		    # abnormal termination
		    elsif( $line =~ /^\s+\(0\) Abnormal termination \(signal (\d+)\)/ )
		    	{
				monitor_debug( "Loading $1 as info{'signal'}\n" ,1);
				$info{'signal'} = $1;
				#print "keys:".join(" ",keys %info)."\n";

				monitor_debug( "checking for core file...\n" ,1);

				# read next line to find core file
				$line = <SUBMIT_LOG>;
				while( ! defined $line )
				{
					sleep 2;
					if(defined $CLTimedCallback)
					{
						CheckCLTimedCallback();
					}

					if(defined $SJTimedCallback)
					{
						CheckSJTimedCallback();
					}

					if(defined $TimedCallback)
					{
						CheckTimedCallback();
					}
					$line = <SUBMIT_LOG>;
				}
			    CondorUtils::fullchomp($line);
				$linenum++;

				if( $line =~ /^\s+\(1\) Corefile in: (.*)/ )
				{
				    $info{'core'} = $1;
				}
				elsif( $line =~ /^\s+\(0\) No core file/ )
				{
				    monitor_debug( "no core file found\n" ,5);
				    # not sure what to do here with $info{'core'}...
				}
				else
				{
				    monitor_debug( "parse error on line $linenum of $info{'log'}:\n\tno core file message found after abornal termination: continuing...\n", 1);
				}
				# execute callback if one is registered
				&$ExitedAbnormalCallback( %info )
				    if defined $ExitedAbnormalCallback;
		    }
		    else
		    {
				monitor_debug( "parse error on line $linenum of $info{'log'}:\n\tno termination status message found after termination. continuing...\n" , 2);
				# re-parse line so we don't miss whatever it said
				goto PARSE;
		    }

			# execute callback if one is registered
			if( defined( $UsageCallback ) ) {
				# Find the usage information and stuff it into %info.

				my $usageLines;
				while( $line ne "...\n" ) {
				    # read next line to see how job terminated
				    $line = <SUBMIT_LOG>;
					while( ! defined $line ) {
						sleep 2;

						if( defined $CLTimedCallback ) { CheckCLTimedCallback(); }
						if( defined $SJTimedCallback ) { CheckSJTimedCallback(); }
						if( defined $TimedCallback ) { CheckTimedCallback(); }

						$line = <SUBMIT_LOG>;
					}
					$usageLines .= $line;
					$linenum++;
				}

				$info{ 'UsageLines' } = $usageLines;
				&$UsageCallback( %info );
			}

		    next LINE;
		}

		# 006: Image Size Updated
		if( $line =~ /^006\s+\(0*(\d+)\.0*(\d+).*?Image\s+size\s+of\s+job\s+updated:\s+(\d+)\s*$/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
			$info{'imagesize'} = $3;
			my $job_id = "$1.$2";

		    monitor_debug( "Saw Image Size Update <$3> for job $job_id\n" ,2);

		    # read next line to see current Megs
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			# Grab current memory in Megs
			if($line =~ /^\s*(\d+).*$/) {
				$info{'megs'} = $1;
				monitor_debug( "Memory usage $1 (MB)\n",2);
			}

		    # read next line to see current RSS
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			# Grab current memory in Megs
			if($line =~ /^\s*(\d+).*$/) {
				$info{'rss'} = $1;
				monitor_debug( "RSS usage $1 (K)\n",2);
			}

			# execute callback if one is registered
			    if (defined $ImageUpdatedCallback) {
					&$ImageUpdatedCallback( %info );
				}

		    next LINE;

		}

		# 007: shadow exception
		if( $line =~ /^007\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    my $job_id = "$1.$2";

		    monitor_debug( "Saw Shadow Exception for job $job_id\n" ,2);

			if(! defined $ShadowCallback)
			{
	    		runCommand( "$CONDOR_RM $1 > condor_rm.out 2>&1" );
				die "Unexpected Shadow Exception. Job Removed!!\n";
			}

		    # decrement # of queued jobs so we will know when to exit monitor
		    #$num_active_jobs--;

		    # read next line to see how job terminated
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'shadowerror'} = $line;

			# execute callback if one is registered
			&$ShadowCallback( %info )
			    if defined $ShadowCallback;

		    next LINE;
		}

		# 022: Job Disconnected
		if( $line =~ /^022\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    my $job_id = "$1.$2";

		    monitor_debug( "Saw Job $job_id Disconnected\n" ,1);

		    # read next line to see cause
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'cause'} = $line;

		    # read next line to see recovery
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'recovery'} = $line;

			# execute callback if one is registered
			&$DisconnectedCallback( %info )
			    if defined $DisconnectedCallback;

		    next LINE;
		}

		# 023: Job Reconnected
		if( $line =~ /^023\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    my $job_id = "$1.$2";

		    monitor_debug( "Saw Job $job_id Reconnected\n" ,1);

		    # read next line to see cause
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'startd'} = $line;

		    # read next line to see recovery
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'starter'} = $line;

			# execute callback if one is registered
			&$ReconnectedCallback( %info )
			    if defined $ReconnectedCallback;

		    next LINE;
		}

		# 024: Job Reconnect Failed
		if( $line =~ /^024\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    my $job_id = "$1.$2";

		    monitor_debug( "Saw Job $job_id Reconnect Fail\n" , 1);

		    # read next line to see cause
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'cause'} = $line;

		    # read next line to see recovery
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'recovery'} = $line;

			# execute callback if one is registered
			&$ReconnectFailedCallback( %info )
			    if defined $ReconnectFailedCallback;

		    next LINE;
		}

		# 010: Job Suspended
		if( $line =~ /^010\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    my $job_id = "$1.$2";

		    monitor_debug( "Saw Job $job_id Suspended\n" ,1);

		    # read next line to see processes affected
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'processes'} = $line;

			# execute callback if one is registered
			&$SuspendedCallback( %info )
			    if defined $SuspendedCallback;

		    next LINE;
		}

		# 010: Job Unsuspended
		if( $line =~ /^011\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    my $job_id = "$1.$2";

		    monitor_debug( "Saw Job $job_id Unsuspended\n" ,1);

			# execute callback if one is registered
			&$UnsuspendedCallback( %info )
			    if defined $UnsuspendedCallback;

		    next LINE;
		}

		# 001: job executing
		elsif( $line =~ 
		       /^001\s+\(0*(\d+)\.0*(\d+).*: (.+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    $info{'sinful'} = $3;
		    $info{'host'} = $3;
		    my $job_id = "$1.$2";

		    # Strip off the < and > from a sinful string for 'host'
		    # For grid universe jobs, there won't be any
		    $info{'host'} =~ s/^<([^>]+)>/$1/;
		    
		    monitor_debug( "Saw job $job_id executing\n" ,2);

		    # execute callback if one is registered
		    &$ExecuteCallback( %info )
			if defined $ExecuteCallback;

		    next LINE;
		}

		# 000: job submitted
		elsif( $line =~ 
		       /^000\s+\(0*(\d+)\.0*(\d+).*<([^>]+)>/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    $info{'host'} = $3;
		    $info{'sinful'} = "<$3>";
		    my $job_id = "$1.$2";

		    monitor_debug( "Saw job $job_id submitted\n" ,2);
		    $submit_info{'cluster'} = $1; # squirrel it away for TimedWait

		    # mark that we've seen a submit so we can start watching # of jobs
		    $saw_submit = 1;
		    # increment # of queued jobs so we will know when to exit monitor
		    $num_active_jobs++;

		    # execute callback if one is registered
		    &$SubmitCallback( %info )
			if defined $SubmitCallback;

		    next LINE;
		}
		# 035: Factory submitted
		elsif( $line =~ 
			/^035\s+\(0*(\d+)\.\-01.*<([^>]+)>/ )
		{
		    $info{'cluster'} = $1;
			$info{'job'} = "-1";
		    $info{'host'} = $2;
		    $info{'sinful'} = "<$2>";

		    monitor_debug( "Saw factory $cluster submitted\n" ,2);
		    $submit_info{'cluster'} = $1; # squirrel it away for TimedWait

		    $saw_submit = 1;
		    # increment # of queued jobs so we will know when to exit monitor
		    $num_active_jobs++;

		    # execute callback if one is registered
		    &$SubmitCallback( %info )
			if defined $SubmitCallback;

		}
		# 036 (10794.-01.000) 02/20 15:20:43 Factory removed
		elsif( $line =~ /^036\s+\(0*(\d+)\.\-01\./ )
		{
		    $info{'cluster'} = $1;
			$info{'job'} = "-1";

		    monitor_debug( "Saw factory $cluster removed\n" ,2);

			# decrement job count so monitor can exit.
		    $num_active_jobs--;

		    # execute callback if one is registered
		    &$ExitedCallback( %info )
			if defined $ExitedCallback;
		}
		# 009: job aborted by user
		elsif( $line =~ 
			/^009\s+\((\d+)\.(\d+).*$/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    my $job_id = "$1.$2";

		    monitor_debug( "Saw job $job_id aborted by user\n" ,2);

		    # decrement # of queued jobs so we will know when to exit monitor
		    $num_active_jobs--;
		    
		    # execute callback if one is registered
		    &$AbortCallback( %info )
			if defined $AbortCallback;
		}
		# 012: job was held
		elsif( $line =~ 
		       /^012\s+\(0*(\d+)\.0*(\d+).*/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    #$info{'host'} = $3;
		    #$info{'sinful'} = "<$3:$4>";
			my $job_id = "$1.$2";
		    
		    # read next line to see how job was held
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'holdreason'} = $line;

		    monitor_debug( "Saw job $job_id held\n" ,1);

		    
		    # execute callback if one is registered
		    &$HoldCallback( %info )
			if defined $HoldCallback;
		}
		# 013: job was released
		elsif( $line =~ 
		       /^013\s+\(0*(\d+)\.0*(\d+).*/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    #$info{'host'} = $3;
		    #$info{'sinful'} = "<$3:$4>";
			my $job_id = "$1.$2";
		    
		    monitor_debug( "Saw job $job_id released\n" ,1);

		    
		    # execute callback if one is registered
		    &$ReleaseCallback( %info )
			if defined $ReleaseCallback;
		}
	#	002 (171.000.000) 06/15 14:49:45 (0) Job file not executable.
		# 002: job not executable
		elsif( $line =~ /^002/ )
		{
		    # decrement # of queued jobs so we will know when to exit monitor
		    $num_active_jobs--;

		    # execute callback if one is registered
		    &$JobErrCallback( %info )
			if defined $JobErrCallback;
		}
	#	008 (171.000.000) 06/15 14:49:45 user defined text
		# 008: chirp ulog
		elsif( $line =~ 
			/^008\s+\((\d+)\.(\d+)\.\d+\)\s+([0-9\/\-]+)\s+([0-9:Z\+\-]+)\s*(.*)$/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    $info{'date'} = $3;
		    $info{'time'} = $4;
		    $info{'ulog'} = $5;
		    my $job_id = "$1.$2";

		    monitor_debug( "Saw job $job_id ulog: $5\n" ,1);

		    &$ULogCallback( %info )
			if defined $ULogCallback;
		}
	    }
    return 1;
}

sub MultiMonitor
{
    my $timeout = shift;
    my $linenum = 0;
    my $line;
    #my %info;
	my $timestamp = 0;
	my $userlogcnt = @userlogs;

	debug( "MultiMonitor (Mon$$) Beginning eventlog monitor with $userlogcnt logs.\n" , 1);

# 4/3/2015 bt
# as we start to test codnor_submit foreach, our clusters are more disperse
# and likely that we could have a bogus file in $submit_info{'log'} because we have a variant
# InitiaDir from the queue line parsing like "queue InitialDir matching (*/)"
#
# if $submit_info{'log'} is valid, go with it for now. At this point we have filled @userlogs
# and we might want to iterate though that array and Monitor each one sequentialy.

	my $reallog = "";
	my $thislog = 0;
	my @children = ();
	my $mypid = 0;

	foreach my $log (@userlogs) {
		print "\t$log\n";
		open(SUBMIT_LOG,"<$log") or die "MultiMonitor failed to open $log for about to be child:$!\n";
		$mypid = fork();
		if($mypid == 0) {
			#print "Child Starting to Monitor\n";
			# get out of parent spawn loop
			last;
		} else {
			#print "Monitor started for log $log pid $mypid\n";
			push @children, $mypid;
		}

	}
	if($mypid == 0) {
	LINE:
	while( 1 )
	{

		if( $saw_submit && $num_active_jobs == 0 )
		{
		    	monitor_debug( "exiting monitor because num_active_jobs=$num_active_jobs\n" , 1);
		    	exit(0);
		}

		# once every event or second see if we should do a timedCallback
		%info = %submit_info; # get initial value of submit stuff in case no events come and we time out

		if(defined $CLTimedCallback)
		{
			CheckCLTimedCallback();
		}

		if(defined $SJTimedCallback)
		{
			CheckSJTimedCallback();
		}

		if(defined $TimedCallback)
		{
			CheckTimedCallback();
		}

		# read line from log (if we're at EOF, wait and re-try)
		$line = <SUBMIT_LOG>;
		while( ! defined $line )
		{
			sleep 2;

			if(defined $CLTimedCallback)
			{
				CheckCLTimedCallback();
			}

			if(defined $SJTimedCallback)
			{
				CheckSJTimedCallback();
			}

			if(defined $TimedCallback)
			{
				CheckTimedCallback();
			}
			$line = <SUBMIT_LOG>;
		}
		CondorUtils::fullchomp($line);
		$linenum++;

	      PARSE:

		# reset %info hash to clear details added for last event
		%info = %submit_info;

		# if this line is for another cluster, ignore
		if ( $line =~ /^\d+\s+\(0*(\d+)\./ && $1 != $cluster )
		{
		    #monitor_debug( "log line for cluster $1, not $cluster -- ignoring...\n" ,1);
		    next LINE;
		}

		# 004: job evicted
		if( $line =~ /^004\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;

		    monitor_debug( "Saw job $1.$2 evicted\n" ,2);

		    # read next line to see if job was checkpointed (but first
		    # sleep for 5 seconds to give it a chance to appear)
		    # [this should really loop like above, not sleep like this...]
		    # sleep 5;
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

		    if( $line =~ /^\s+\(0\) Job was not checkpointed\./ )
		    {
			monitor_debug( "job was evicted without ckpt\n" ,2);
			# execute callback if one is registered
			&$EvictedWithoutCheckpointCallback( %info )
			    if defined $EvictedWithoutCheckpointCallback;

		    }
		    elsif( $line =~ /^\s+\(1\) Job was checkpointed\./ )
		    {
			monitor_debug( "job was evicted with ckpt\n" ,2);
			# execute callback if one is registered
			&$EvictedWithCheckpointCallback( %info )
			    if defined $EvictedWithCheckpointCallback;
		    }
		    elsif( $line =~ /^\s+\(0\) Job terminated and was requeued.*$/ )
		    {
			monitor_debug( "job was evicted and requeued\n" ,2);
			# execute callback if one is registered
			&$EvictedWithRequeueCallback( %info )
			    if defined $EvictedWithRequeueCallback;
		    }
		    else
		    {
			monitor_debug( "parse error on line $linenum of $info{'log'}:\n\tno checkpoint message found after eviction. continuing...\n", 1);
			# re-parse line so we don't miss whatever it said
			goto PARSE;
		    }
			# let all the special callbacks got first
		    # execute callback if one is registered
			# Are there any other types of evictions?
		    #&$EvictedCallback( %info )
			#if defined $EvictedCallback;

		    next LINE;
		}

		# 005: job terminated
		if( $line =~ /^005\s+\(0*(\d+)\.0*(\d+)/ )
		{
			$info{'cluster'} = $1;
			$info{'job'} = $2;

			monitor_debug( "Saw job terminated\n" ,2);

			# decrement # of queued jobs so we will know when to exit monitor
			$num_active_jobs--;

			# execute callback if one is registered
			&$ExitedCallback( %info ) if defined $ExitedCallback;

			# read next line to see how job terminated
			$line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
			CondorUtils::fullchomp($line);
			$linenum++;

			# terminated successfully
			if( $line =~ /^\s+\(1\) Normal termination \(return value 0\)/ )
			{
				# execute callback if one is registered
				&$ExitedSuccessCallback( %info ) if defined $ExitedSuccessCallback;
			}
			# terminated w/error
			elsif( $line =~
					/^\s+\(1\) Normal termination \(return value (\d+)\)/ )
			{
				$info{'retval'} = $1;
				# execute callback if one is registered
				&$ExitedFailureCallback( %info ) if defined $ExitedFailureCallback;
			}
			# abnormal termination
			elsif( $line =~ /^\s+\(0\) Abnormal termination \(signal (\d+)\)/ )
			{
				monitor_debug( "Loading $1 as info{'signal'}\n" ,1);
				$info{'signal'} = $1;

				monitor_debug( "checking for core file...\n" ,1);

				# read next line to find core file
				$line = <SUBMIT_LOG>;
				while( ! defined $line )
					{
					sleep 2;
					if(defined $CLTimedCallback)
					{
						CheckCLTimedCallback();
					}

					if(defined $SJTimedCallback)
					{
						CheckSJTimedCallback();
					}

					if(defined $TimedCallback)
					{
						CheckTimedCallback();
					}
					$line = <SUBMIT_LOG>;
				}
				CondorUtils::fullchomp($line);
				$linenum++;

				if( $line =~ /^\s+\(1\) Corefile in: (.*)/ )
				{
					$info{'core'} = $1;
				}
				elsif( $line =~ /^\s+\(0\) No core file/ )
				{
					monitor_debug( "no core file found\n" ,5);
					# not sure what to do here with $info{'core'}...
				}
				else
				{
					monitor_debug( "parse error on line $linenum of $info{'log'}:\n\tno core file message found after abornal termination: continuing...\n", 1);
				}
				# execute callback if one is registered
				&$ExitedAbnormalCallback( %info ) if defined $ExitedAbnormalCallback;
			}
			else
			{
				monitor_debug( "parse error on line $linenum of $info{'log'}:\n\tno termination status message found after termination: continuing...\n" , 2);
				# re-parse line so we don't miss whatever it said
				goto PARSE;
			}

			# execute callback if one is registered
			&$UsageCallback( %info ) if defined $UsageCallback;

			next LINE;
		}

		# 006: Image Size Updated
		if( $line =~ /^006\s+\(0*(\d+)\.0*(\d+).*?Image\s+size\s+of\s+job\s+updated:\s+(\d+)\s*$/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
			$info{'imagesize'} = $3;

		    monitor_debug( "Saw Image Size Update <$3>\n" ,2);

		    # read next line to see current Megs
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			# Grab current memory in Megs
			if($line =~ /^\s*(\d+).*$/) {
				$info{'megs'} = $1;
				monitor_debug( "Memory usage $1 (MB)\n",2);
			}

		    # read next line to see current RSS
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			# Grab current memory in Megs
			if($line =~ /^\s*(\d+).*$/) {
				$info{'rss'} = $1;
				monitor_debug( "RSS usage $1 (K)\n",2);
			}

			# execute callback if one is registered
			    if (defined $ImageUpdatedCallback) {
					&$ImageUpdatedCallback( %info );
				}

		    next LINE;

		}

		# 007: shadow exception
		if( $line =~ /^007\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;

		    monitor_debug( "Saw Shadow Exception\n" ,2);

			if(! defined $ShadowCallback)
			{
	    		runCommand( "$CONDOR_RM $1 > condor_rm.out 2>&1" );
				die "Unexpected Shadow Exception. Job Removed!!\n";
			}

		    # decrement # of queued jobs so we will know when to exit monitor
		    #$num_active_jobs--;

		    # read next line to see how job terminated
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'shadowerror'} = $line;

			# execute callback if one is registered
			&$ShadowCallback( %info )
			    if defined $ShadowCallback;

		    next LINE;
		}

		# 022: Job Disconnected
		if( $line =~ /^022\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;

		    monitor_debug( "Saw Job Disconnected\n" ,1);

		    # read next line to see cause
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'cause'} = $line;

		    # read next line to see recovery
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'recovery'} = $line;

			# execute callback if one is registered
			&$DisconnectedCallback( %info )
			    if defined $DisconnectedCallback;

		    next LINE;
		}

		# 023: Job Reconnected
		if( $line =~ /^023\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;

		    monitor_debug( "Saw Job Reconnected\n" ,1);

		    # read next line to see cause
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'startd'} = $line;

		    # read next line to see recovery
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'starter'} = $line;

			# execute callback if one is registered
			&$ReconnectedCallback( %info )
			    if defined $ReconnectedCallback;

		    next LINE;
		}

		# 024: Job Reconnect Failed
		if( $line =~ /^024\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;

		    monitor_debug( "Saw Job Reconnect Fail\n" ,2);
			print "Saw reconnect fail\n";

		    # read next line to see cause
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'cause'} = $line;

		    # read next line to see recovery
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'recovery'} = $line;

			# execute callback if one is registered
			&$ReconnectFailedCallback( %info )
			    if defined $ReconnectFailedCallback;

		    next LINE;
		}

		# 010: Job Suspended
		if( $line =~ /^010\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;

		    monitor_debug( "Saw Job Suspended\n" ,1);

		    # read next line to see processes affected
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $CLTimedCallback)
				{
					CheckCLTimedCallback();
				}

				if(defined $SJTimedCallback)
				{
					CheckSJTimedCallback();
				}

				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'processes'} = $line;

			# execute callback if one is registered
			&$SuspendedCallback( %info )
			    if defined $SuspendedCallback;

		    next LINE;
		}

		# 010: Job Unsuspended
		if( $line =~ /^011\s+\(0*(\d+)\.0*(\d+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;

		    monitor_debug( "Saw Job Unsuspended\n" ,1);

			# execute callback if one is registered
			&$UnsuspendedCallback( %info )
			    if defined $UnsuspendedCallback;

		    next LINE;
		}

		# 001: job executing
		elsif( $line =~ 
		       /^001\s+\(0*(\d+)\.0*(\d+).*: (.+)/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    $info{'sinful'} = $3;
		    $info{'host'} = $3;
		    # Strip off the < and > from a sinful string for 'host'
		    # For grid universe jobs, there won't be any
		    $info{'host'} =~ s/^<([^>]+)>/$1/;
		    
		    monitor_debug( "Saw job executing\n" ,2);

		    # execute callback if one is registered
		    &$ExecuteCallback( %info )
			if defined $ExecuteCallback;

		    next LINE;
		}

		# 000: job submitted
		elsif( $line =~ 
		       /^000\s+\(0*(\d+)\.0*(\d+).*<([^>]+)>/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    $info{'host'} = $3;
		    $info{'sinful'} = "<$3>";

		    monitor_debug( "Saw job submitted\n" ,2);
		    $submit_info{'cluster'} = $1; # squirrel it away for TimedWait

		    # mark that we've seen a submit so we can start watching # of jobs
		    $saw_submit = 1;
		    # increment # of queued jobs so we will know when to exit monitor
		    $num_active_jobs++;

		    # execute callback if one is registered
		    &$SubmitCallback( %info )
			if defined $SubmitCallback;

		    next LINE;
		}
		# 009: job aborted by user
		elsif( $line =~ 
			/^009\s+\((\d+)\.(\d+).*$/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;

		    monitor_debug( "Saw job abort cluster $1 job $2\n" ,2);

		    # decrement # of queued jobs so we will know when to exit monitor
		    $num_active_jobs--;
		    
		    # execute callback if one is registered
		    &$AbortCallback( %info )
			if defined $AbortCallback;
		}
		# 012: job was held
		elsif( $line =~ 
		       /^012\s+\(0*(\d+)\.0*(\d+).*/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    #$info{'host'} = $3;
		    #$info{'sinful'} = "<$3:$4>";
		    
		    # read next line to see how job was held
		    $line = <SUBMIT_LOG>;
			while( ! defined $line )
			{
				sleep 2;
				if(defined $TimedCallback)
				{
					CheckTimedCallback();
				}
				$line = <SUBMIT_LOG>;
			}
		    CondorUtils::fullchomp($line);
		    $linenum++;

			$info{'holdreason'} = $line;

		    monitor_debug( "Saw job held\n" ,1);

		    
		    # execute callback if one is registered
		    &$HoldCallback( %info )
			if defined $HoldCallback;
		}
		# 013: job was released
		elsif( $line =~ 
		       /^013\s+\(0*(\d+)\.0*(\d+).*/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    #$info{'host'} = $3;
		    #$info{'sinful'} = "<$3:$4>";
		    
		    monitor_debug( "Saw job released\n" ,1);

		    
		    # execute callback if one is registered
		    &$ReleaseCallback( %info )
			if defined $ReleaseCallback;
		}
	#	002 (171.000.000) 06/15 14:49:45 (0) Job file not executable.
		# 002: job not executable
		elsif( $line =~ /^002/ )
		{
		    # decrement # of queued jobs so we will know when to exit monitor
		    $num_active_jobs--;

		    # execute callback if one is registered
		    &$JobErrCallback( %info )
			if defined $JobErrCallback;
		}
	#	008 (171.000.000) 06/15 14:49:45 user defined text
		# 008: chirp ulog
		elsif( $line =~ 
			/^008\s+\((\d+)\.(\d+)\.\d+\)\s+([0-9\/\-]+)\s+([0-9:Z\+\-]+)\s*(.*)$/ )
		{
		    $info{'cluster'} = $1;
		    $info{'job'} = $2;
		    $info{'date'} = $3;
		    $info{'time'} = $4;
		    $info{'ulog'} = $5;

		    monitor_debug( "Saw job ulog cluster $1 job $2 : $5\n" ,1);

		    &$ULogCallback( %info )
			if defined $ULogCallback;
		}
	    }
	} # end of code only children execute
	# parent now waits for kids and assembles a unified return

    #return 1; is a good return from monitor
	my $childpid;
	my $retvalue = 0;
	my $accumulatedreturn = 0;

	foreach my $child (@children) {
		while(($childpid = waitpid($child,0)) != -1) {
			$retvalue = $?;
			if($childpid == 0) {
				#print "Waitinng on child:$child waitpid says:$childpid\n";
			} else {
				#print "Child:$childpid has returned\n";
				if ($retvalue & 0x7f) {
					# died with signal and maybe coredump.
					# Ignore the fact a coredump happened for now.
					TestDebug( "Monitor done and status bad: \n",4);
					$accumulatedreturn += 1;
				} else {
					# Child returns valid exit code
					my $rc = $retvalue >> 8;
					#print "ProcessReturn: Exited normally $rc\n";
					$accumulatedreturn += $rc;
				}
			}
		}
	}
	if($accumulatedreturn == 0) {
		monitor_debug ("leaving eventlog monitor. All children ran clean\n", 1);
		return(1);
	} else {
		monitor_debug ("leaving eventlog montior. One or more of the children had issues\n", 1);
		return(0);
	}
}

sub CheckCLTimedCallback
{
	my $diff = 0;
	my $cluster = $submit_info{"cluster"};
	my $timestamp = 0;

	$timestamp = time; #get current time
	$diff = $timestamp - $timer_CLtime;
	monitor_debug("Delta for timer is $diff\n",6);
	if( $diff >= $CLTimedCallbackWait)
	{
		#call timed callback
		monitor_debug("Called timed callback-- $cluster --\n",5);
		if(defined $CLTimedCallback) {
			my $tempcallback = $CLTimedCallback; # save and removed callback request
			RemoveCLTimed();
			&$tempcallback(%info);
		}
	}
}

sub CheckSJTimedCallback
{
	my $diff = 0;
	my $cluster = $submit_info{"cluster"};
	my $timestamp = 0;

	$timestamp = time; #get current time
	$diff = $timestamp - $timer_SJtime;
	monitor_debug("Delta for timer is $diff\n",6);
	if( $diff >= $SJTimedCallbackWait)
	{
		#call timed callback
		monitor_debug("Called timed callback-- $cluster --\n",5);
		if(defined $SJTimedCallback) {
			my $tempcallback = $SJTimedCallback; # save and removed callback request
			RemoveSJTimed();
			&$tempcallback(%info);
		}
	}
}

sub CheckTimedCallback
{
	my $diff = 0;
	my $cluster = $submit_info{"cluster"};
	my $timestamp = 0;

	$timestamp = time; #get current time
	$diff = $timestamp - $timer_time;
	monitor_debug("Delta for timer is $diff\n",6);
	if( $diff >= $TimedCallbackWait)
	{
		#call timed callback
		monitor_debug("Called timed callback-- $cluster --\n",5);
		if(defined $TimedCallback) {
			my $tempcallback = $TimedCallback; # save and removed callback request
			RemoveTimed();
			&$tempcallback(%info);
		}
	}
}

################################################################################
#
# debug( string, level )
#
# If a level is passed in then the printing varies by current level
# otherwise we react only to dubug on or off at the momment.
#
# Predefined levels:
#		5  Condor.pm
#		4  CondorTest.pm
#		3  CondorPersonal.pm
#		2  batch_test.pl
#		1  all existing prints being converted
#
################################################################################

sub debug {
    my ($msg, $level) = @_;
    
    if(!(defined $level)) {
    	print timestamp() . " $msg";
    }
    elsif($level <= $DEBUGLEVEL) {
    	print timestamp() . " $msg";
    }
}

sub DebugLevel {
	my $newlevel = shift;
	my $oldlevel = $DEBUGLEVEL;
    $DEBUGLEVEL = $newlevel;
	return($oldlevel);
}

sub ParseSubmitFile
{
    my $submit_file = shift || croak "missing submit file argument";
    my $line = 0;
	my $variable;
	my $value;
	#my $drydatafile = CondorTest::TempFileName("fetchdrydata");

    if( ! open( SUBMIT_FILE, $submit_file ) )
    {
		print "error opening \"$submit_file\": $!\n";
		return 0;
    }
    
    debug( "  reading submit file $submit_file\n" ,5);

	#print "Seeing how many user logs there are\n";

	# this could be a condor_submit foreach syntax expansion test
	GatherUserLogs($submit_file,"-");

    while( <SUBMIT_FILE> )
    {
		CondorUtils::fullchomp($_);	# do a windows strip, fine for linux
		$line++;

		#print "ParseSubmitFile: line:$_\n";
		# skip comments & blank lines
		next if /^#/ || /^\s*$/;

		# if this line is a variable assignment...
		if( /^\s*(\w+)\s*\=\s*(.*)$/ )
		{
		    $variable = lc $1;
		    $value = $2;

			#print "ParseSubmitFile: variable:$variable value:$value\n";

		    # if line ends with a continuation ('\')...
		    while( $value =~ /\\\s*$/ )
		    {
				# remove the continuation
				$value =~ s/\\\s*$//;

				# read the next line and append it
				<SUBMIT_FILE> || last;
				$value .= $_;
		    }

		    # compress whitespace and remove trailing newline for readability
			# Don't change white space. Some environment tests expect tabs to stay tabs.
		    # $value =~ s/\s+/ /g;
		    CondorUtils::fullchomp($value);

		
			# Do proper environment substitution
		    if( $value =~ /(.*)\$ENV\((.*)\)(.*)/ )
		    {
				my $envlookup = $ENV{$2};
		    	debug( "  Found $envlookup in environment \n", 6);
				$value = $1.$envlookup.$3;
		    }

		    debug( "  $variable = $value\n" ,5);
		    
		    # save the variable/value pair
		    $submit_info{$variable} = $value;
		}
		else
		{
		    debug( "  line $line of $submit_file not a variable assignment... skipping\n", 6);
			#print "ParseSubmitFile: $_ not variable assignment\n";
		}
    }
    return 1;
}


sub AccessUserLogs {
	my $arrayref = shift;
	my $count = @userlogs;
	debug("  transferring $count UserLogs to CondorTest module\n", 3);
	foreach my $log (@userlogs) {
		push @{$arrayref}, $log;
	}
	return($count);
}

sub timestamp {
    return strftime("%H:%M:%S", localtime);
}

sub safe_WIFEXITED {

	my $status = shift;

	# our sneaky way to detect if WIFEXITED macro is defined.
	eval{ my $tmp = WIFEXITED(0); };
	if ( $@ ) {
		# no WIFEXITED, so AND the status with 127, which
		# in theory should tell us if we died with a signal or not.
		return !($status & 127);
	} else {
		return WIFEXITED($status);
	}
}

sub safe_WEXITSTATUS {

	my $status = shift;

	# our sneaky way to detect if WEXITSTATUS macro is defined.
	eval{ my $tmp = WEXITSTATUS(0); };
	if ( $@ ) {
		# no WEXITSTATUS, so just do what WEXITSTATUS normally
		# does, which is shift 8 (divide by 256)
		return $status >> 8;
	} else {
		return WEXITSTATUS($status);
	}
}

###########################################################################
#
#	With the new condor_submit parsing for the new submit_file syntax
#	we can not always be sure how many tests we really have. We have decided
#	to monitor multple jobs, not by forking a monitor for each job but by
#	looking at them sequentially. Obviously if we have a log per each and we 
#	did not thing we were done, this would be easy. N jobs could be in one 
#	log or N logs. The current monitor code assumes it will see all the submit
#	events and tracks being done with all jobs when the job counter goes down to 0
#	again.
#
#	With say 4 jobs and 4 logs it means after the first one it thinks it is done
#	because it only saw one submit event.
#
#	We still need to operate that way but we need another counter. We will
#	get this by extracting the real count by parsing "ProcId=N" statements
#	from the dry-run data to determine the real count for jobs to monitor
#	and we have to be sensitive to both counts.
#
sub GatherUserLogs {
	my $submitfile = shift;
	#my $drydatafile = shift;
	my $arrayref;
	my $logcount = 0;
	my @tmplogs = ();

	$arrayref = GatherDryData($submitfile,"-");
	# store dry data in expected locaton
	foreach my $line (@{$arrayref}) {
		push @submitdrydata, $line;
	}
	DryExtract(\@submitdrydata,\@tmplogs,"UserLog");
	foreach my $line (@tmplogs) {
		if($line =~ /UserLog=\"(.*?)\"/) {
			push @userlogs, $1;
		}
	}
	$logcount = @userlogs;
	foreach my $log (@userlogs) {
		debug("  GatherUserLogs: found $log\n", 4);
	}
	# how many jobs did this submit produce
	@tmplogs = ();
	DryExtract(\@submitdrydata,\@tmplogs,"ProcId");
	$dryrun_jobcount = @tmplogs;
	debug ("  GatherUserLogs found $logcount logs and $dryrun_jobcount jobs\n", 3);
}

sub CheckAllowed {
	my $event = shift;
	my $test = shift;
	my $mesg = shift;
	if(exists $AllowedEvents{$event}) {
		#print "$event allowed for $test: $mesg\n";
	} else {
		die "$test: FAILED $mesg\n";
	}
}

sub SetAllowedEvents {
	my $allowed = shift;
	my @block = split /,/, $allowed;
	debug ("SetAllowedEvents events called for events:\n", 1);
	foreach my $item (@block) {
		if ($DEBUGLEVEL >= 1) { print "\t$item\n"; }
		$AllowedEvents{$item} = 1;
	}
}

sub ClearAllowedEvents {
	debug ("ClearAllowedEvents events called. clearing events.\n", 1);
	%AllowedEvents = ();
}

1;
